Weaver's Craft: the periodical for 4- to 8-shaft handweavers

Weaver's Craft home page
Subscribe
Current Issue
Back Issues
Weaving Hints
Current location: Errata
About Weaver's Craft
Contact Plain Tabby Press

 


Errata

"Trust, but Verify--always a good policy."

Issue 6 Volume 1 No 6 December/January 2001 Weaving and Fulling Wool
Page 14: The Breakers Scarf
The treadling should be:

Correct treadling for the Breakers Scarf

 

Issue 11 Volume 3 No 1 Spring 2002 Complementary Plain Weave.

I copied information about the selvedges from the warp-face projects into the balanced projects by mistake. The text should read:

Page 8: right column: Weaving: ...(place 5 ends in the dent rather than 4).
Page 12: center column: Weaving: ...(place 5 ends in the dent rather than 4).
Page 15: left column: Weaving: ... there will be 3 ends in the dent rather than 4 (the last dent on the left has 2 ends in the dent).

Issue 23 Barleycorn.

Page 2: In the tie-up of the draft, two treadles are the same by mistake--the right-hand treadle of the pair should lift shafts 2 and 3.
Page 10: Blue Barleycorn Mats or Towels. In the Complete Threading Draft, every other thread should be on shaft 1. Add a shaft-1 thread to the right edge of the topmost "continued" line.
Page 14: Total Warp Ends is 143. (The threading draft is correct.)
Page 15: left column: Weaving: ... there will be 3 ends in the dent rather than 4 (the last dent on the left has 2 ends in the dent).

If you have found other errors in Weaver’s Craft, please let me know.

  
Home
Subscribe
Current Issue
Back Issues
Weaving Hints
Errata
About Weaver’s Craft
Contact Plain Tabby Press